Fitting thermistors to Mistral ff92s

Home › Forums › Public Support Forums › Help And Support › Fridge And Freezer Forum › Fitting thermistors to Mistral ff92s

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • July 31, 2006 at 1:29 pm #19565
    sibi24
    Participant

    Hi
    Advice on how to fit new thermistors to my fridge freezer, please please please!
    I think that they need replacing as the fridge temp is unstable. Various error messages appear E8 or E7. I followed previous advice taken from these forums – defrosted fridge and cleared any ice and debris, checked for blockages in air vents, checked both fans are functional and that the freezer fan operates when the light is switched off. All OK. 😳 The only other thing is the thermistors. I do not know what they look like or how to change them!
    Thanks, Sib

    July 31, 2006 at 1:57 pm #183674
    Dave_Conway
    Participant

    Re: Fitting thermistors to Mistral ff92s

    I gave the link earlier in an email for the same but here it is again 😀

    http://www.ukwhitegoods.co.uk/modules.p … Path=27_71

    The two top ones, that’s what they look like 😉

    For help on diagnosing and replacing please read all of this thread:

    http://www.ukwhitegoods.co.uk/modules.p … sc&start=0

    I know there’s a lot to read but everything you need is in there 🙂

    Dave.

    May 9, 2014 at 6:54 am #183675
    rossmk
    Participant

    Re: Fitting thermistors to Mistral ff92s

    Hi, I know this thread is old, but the links redirect to a forum “home” page. Any chance you could post the updated links? I’m particularly interested in the second one for fitting the thermistors.

    Thanks.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.