zanussi zwf 1010w

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › zanussi zwf 1010w

Viewing 10 posts - 1 through 10 (of 10 total)
  • Author
    Posts
  • July 31, 2006 at 4:07 pm #19571
    johno1998
    Participant

    this washing machine wont start i set the program close the door press start button and the end light just flashes some times the door locks some time it dosent any ideas ❓

    July 31, 2006 at 4:21 pm #183688
    Dave_Conway
    Participant

    Re: zanussi zwf 1010w

    You got the PNC there Johno ?

    I’ll see if I can dig out the diagnostics.

    Dave.

    July 31, 2006 at 5:01 pm #183689
    funkyboogy
    Participant

    Re: zanussi zwf 1010w

    more than likely the pcb…
    had a few recently, also check hose at top of tub,
    this comes loose water leaks out down onto pump windings, thus taking out pcb…..

    cheers ally

    July 31, 2006 at 6:27 pm #183690
    johno1998
    Participant

    Re: zanussi zwf 1010w

    The pnc is 914213006 and serial number is 41400164 thanks for that. 😀
    funky i will check what you say also thankyou.

    July 31, 2006 at 6:54 pm #183691
    Turbo
    Participant

    Re: zanussi zwf 1010w

    Had this same problem with a Zan FS 1555W it turned out to be a faulty door lock. 😆 I believe your machine uses the same door lock Prt No 1249675123. The faulty one I removed had a brown scorch mark where it had burnt out internally. Could be the board though if a new lock fails to sort it. 😥
    Turbo.

    July 31, 2006 at 9:11 pm #183692
    johno1998
    Participant

    Re: zanussi zwf 1010w

    Yeah i thought it maybe door inter will try and then let you know 😉

    July 31, 2006 at 10:38 pm #183693
    Dave_Conway
    Participant

    Re: zanussi zwf 1010w

    johno1998 wrote:The pnc is 914213006

    On the way 🙂

    Dave.

    August 2, 2006 at 3:11 pm #183694
    johno1998
    Participant

    Re: zanussi zwf 1010w

    Cheers dave for that intresting reading at 7.30 this morning Its looking like door interlock 😆

    August 2, 2006 at 6:57 pm #183695
    cab
    Participant

    Re: zanussi zwf 1010w

    have you checked the drain pump? should drain first, if pump goes s/c it blows the pcb, so dont just fit pcb without checking pump 😳

    August 2, 2006 at 7:30 pm #183696
    johno1998
    Participant

    Re: zanussi zwf 1010w

    cheers cab will do

  • Author
    Posts
Viewing 10 posts - 1 through 10 (of 10 total)
  • You must be logged in to reply to this topic.