- This topic has 1 reply, 2 voices, and was last updated 19 years, 8 months ago by
.
-
Posts
-
Hello
Had a look through previous posts and cannot find anything for this.I managed to get water through the front buttons and onto the PCB when the kitchen sink over flowed.
I dried it with a hairdryer but still have same problem.The machine will come on, start its cycle then the door lock light and LED 1+3 flash in time with each other.It’s a constant flashing so nothing to count.The machine will keep churning as if the pump is running but won’t switch off.
Any ideas?Many Thanks
VSBRe: Indesit WIDL 126 error codes 1+3
Buttons 1+3 supposedly indicate a fault in the water level control/pressure switch area. However if the facia module has had water on it then it could be causing spurious messages, the pressure switch is nowhere near the front console.
The best advice I can give is to see if we have someone in your area who can take a look, click the link in my sig.
Please remove the mains plug if you intend to go further yourself.
- You must be logged in to reply to this topic.