HOTPIONT BSI620 error code required

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › HOTPIONT BSI620 error code required

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • August 3, 2006 at 8:42 pm #19668
    alro
    Participant

    hi gents
    HT BSI620 error code second & four leds flashing any ideas
    is this Machine an Indesit

    cheers ALRO

    August 3, 2006 at 9:01 pm #183994
    Dave_Conway
    Participant

    Re: HOTPIONT BSI620 error code required

    You sure about that model number Alro ? 😉

    It doesn’t exist 🙂

    Dave.

    August 15, 2006 at 5:48 pm #183995
    alro
    Participant

    Re: HOTPIONT BSI620 error code required

    Dave
    The model number is correct double checked it Sorry for the reply customer been on hols, machine only 14 monthes old but they do not wont hotp to look at it.Have tested drian &cycle pumps heater all ok.
    Select programme macihne fills abit & emptys fills abit &washes closes down with 2&4 neons flashing
    Cheers alro

    August 15, 2006 at 10:19 pm #183996
    Dave_Conway
    Participant

    Re: HOTPIONT BSI620 error code required

    Definitely not a correct model but check the WIDL codes in the error codes thread, that sounds closest 🙂

    Dave.

    August 15, 2006 at 11:09 pm #183997
    iadom
    Moderator

    Re: HOTPIONT BSI620 error code required

    Does it look anything like this monstrosity http://tinyurl.com/zskej

    BS is used for recent ‘Big Size’ machines, never heard of a BS1620 though. 😕

    PS. ‘Only £805′ for an Indesit, “I don’t believe it” 😥 👿

    August 16, 2006 at 2:33 pm #183998
    recall
    Participant

    Re: HOTPIONT BSI620 error code required

    if its a d/w then it falls under then bfi 620 catagory. 2+4 is htr failure.
    megger the htr as poss down to earth, But megger evrything as well as these can throw up sporadic faults when wet 😕

    August 16, 2006 at 3:06 pm #183999
    Martin
    Participant

    Re: HOTPIONT BSI620 error code required

    As recall says it has a BIT100 card in it so that means a Heater fault :tup:

    August 16, 2006 at 3:54 pm #184000
    iadom
    Moderator

    Re: HOTPIONT BSI620 error code required

    Might have helped if the OP had mentioned it was a DISHWASHER. :rolls: 😀

  • Author
    Posts
Viewing 8 posts - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.