- This topic has 4 replies, 3 voices, and was last updated 19 years, 8 months ago by
.
-
Posts
-
The oven came with the flat I bought and according to the manual, the oven will only start if it the time is set on the digital display and the mode is manual.
It does have power running to it, and the display alternatively flashes “0:00” and “auto”. I have followed the instructions to set the time but the buttons do not seem to make the numbers change. Are the buttons broken or am I doing something wrong? As instructed I hold the time button and press the + or – but nothing happens. Have tried pressing other buttons too, but nothing changes.
Also, does the “auto” that flashes mean it’s not in manual mode? I am afraid I don’t know how to change the mode.
Am grateful for any advice that you can offer – thanks!!
Re: AEG Competence 3201 B oven faulty/how to set clock?
If the auto is flashing than it will almost certainly be in auto mode and the oven therefore will not work. Cannot give you advice on setting but it usually involves pressing 2 buttons as well as the + –
Re: AEG Competence 3201 B oven faulty/how to set clock?
Press buttons 2 and 3 Simultaneously while pressing + or – to set correct time. Download a manual for this model from http://www.serviceforce.co.uk/pdfs/U04053.pdf hope that helps.
Re: AEG Competence 3201 B oven faulty/how to set clock?
Petitcherie wrote: I have followed the instructions to set the time but the buttons do not seem to make the numbers change. !
- You must be logged in to reply to this topic.