HOTPOINT FDW60P error code

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › HOTPOINT FDW60P error code

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • August 9, 2006 at 6:27 pm #19819
    grooster
    Participant

    Hi,

    Just been out to a dishwasher FDW60P. It doesnt seem to be heating. Flashing light 4. This appears to be a time out fault on the heating.
    What is the most probable cause of this error code. I’ve checked the heater, thats ok. Could it be the thermistor. I’ve tried to look for the thermostat/thermistor. I must be going blind but i cant find it.

    Any body got any ideas?

    I would be very gratefull

    Thanks

    Nick

    August 9, 2006 at 7:35 pm #184687
    clyde
    Participant

    Re: HOTPOINT FDW60P error code

    if the heater is ok – it’ll be the control card the thermistor is attached to it 😉

    August 9, 2006 at 8:17 pm #184688
    timdowning
    Participant

    Re: HOTPOINT FDW60P error code

    Check the thermistor hasn’t come away from bracket, (take front of door off, thermistor is held in place by the dispenser.)

    August 10, 2006 at 7:40 am #184689
    grooster
    Participant

    Re: HOTPOINT FDW60P error code

    Thanks for your help guys. I took the door off yesterday and checked all terminals were connected but couldnt find any problems. Looks like its what i thought it would be the pcb.

    Cheers

    Nick

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.