- This topic has 2 replies, 2 voices, and was last updated 19 years, 8 months ago by
.
-
Posts
-
Hi,
Symptom – no drum rotation and door won`t open using push button.
The motor brushes are very worn – one brush is at its shortest I`m sure – but there is not the usual evidence of sparking taken place. If the brushes are making poor contact would the resultant no motor action stop the door interlock from operating.
If the door interlock is faulty would that stop the motor operating?
Thanks
Laurence
Re: Miele Wash M/c W698 Door & Spin Problems
Shouldn’t do, i find a problem that has arose a few times in Mieles is the little PCB board behind the start button is corroded & bad connections, look for leak at soap drawer or door gasket, sometimes water gets onto PCB causing door operation problems. The door can be opened mechanically by a pull lever located in filter compartment, motor fault is usually brushes. Take care to insert them correctly & make sure you’ve released them before trying motor.
- You must be logged in to reply to this topic.