indesit IS60V start switch

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › indesit IS60V start switch

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • August 17, 2006 at 2:33 pm #20031
    abbots
    Participant

    hi guys,
    indesit dryer.

    customer says that she presses on/start on the dryer and the switch will not stay in and the dryer will not start unless the button is not held in.I presume these dryers work on the same principle as the old hpt/creda condensor dryers,where there is a relay on board some where that will keep machine working until the power is interupted ie. the door opened.
    So i take it when she says the button will not stay in is correct,it’s just the relay that is faulty.
    can any one confirm?
    thanks john

    August 17, 2006 at 4:20 pm #185509
    johnnyj
    Participant

    Re: indesit IS60V start switch

    Its a small pcb relay behind the console usual the culprit, dead easy to replace, not got part n/o to hand at the minute i’ll dig it out later.

    August 17, 2006 at 4:22 pm #185510
    iadom
    Moderator

    Re: indesit IS60V start switch

    1702778 😉

    August 17, 2006 at 6:10 pm #185511
    abbots
    Participant

    Re: indesit IS60V start switch

    thanks guys.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.