- This topic has 8 replies, 3 voices, and was last updated 19 years, 7 months ago by
.
-
Posts
-
Please can someone help
Had a AL01 fault on my dishwasher, so i opened it up and replaced a hose that had a hole in.
Started it up and now have a AL05 fault
What does this mean
Thanks In Advance
Re: Hotpoint Ultima FDW85 AL05 Error
Was the hose internal and how did you get access, did you tip onto the right and side.
Re: Hotpoint Ultima FDW85 AL05 Error
Me facing the front door, i laid it to the right
The hose was the water out hose
Re: Hotpoint Ultima FDW85 AL05 Error
Sounds like you have got an airlock, never lay them down on that side causes no end of problems.
Re: Hotpoint Ultima FDW85 AL05 Error
Any idea’s how to get it working mate?
Thanks for that advice, sounds like i’ve learnt the hard way, (hopefully not the expensive way)
After the AL05 error flashes, if i lean it to the right side, loads of water comes out still
Re: Hotpoint Ultima FDW85 AL05 Error
When you tip it on that side any water in the sump will run up the pressure system getting trapped causing an airlock which in turn causes an AL05 fault, cleaning pressure system may cure but might need a pressure switch.
Re: Hotpoint Ultima FDW85 AL05 Error
OOOOO
Doesn’y sound easy!!!
Is it time for a professional??
Or can you explain what i need to do
Re: Hotpoint Ultima FDW85 AL05 Error
As they say, when you are in a hole, stop digging,
- You must be logged in to reply to this topic.