- This topic has 3 replies, 3 voices, and was last updated 19 years, 7 months ago by
.
-
Posts
-
What seemed like the contents of my sons pockets stuck in the waste trap, turned out to be fine skimmed of strands of white plastic, added to that, when it was at top spin speed there was a loud rhymical knocking and an alarming amount of smoke coming out of the machine. At slower spin speeds just the knocking (no smoke) When I turn the drum by hand it seems ok.
Belt, brushes are fineAm I right in thinking bearings?
If so what would I be expected to pay for it’s repair. Unfortunately there are no whitegoods engineers in my area.Thanks
Re: Zanussi wjs 1265 addition
yellowfish wrote:Am I right in thinking bearings?
No!
It is some foreign object (coin or something?) caught between the front outer drum and the inner stainless drum. The whole drum will need to come out, be dismantled to remove the offending article. 😕
Re: Zanussi wjs 1265 addition
WEll I removed the drum, opened it up and found that the drum had been wearing against the front outer drum, so unfortunately not a foreign object, so is it bearings, I say this because when I turn the drum it rotates quite freely, without any noise.
Any ideas would be appreciated.
- You must be logged in to reply to this topic.