Zanussi Condencer dryer model TCE7276w

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Zanussi Condencer dryer model TCE7276w

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • August 26, 2006 at 10:32 am #20309
    mjhservices
    Participant

    Zanussi Condencer dryer model TCE7276w lights up but does not respond to start button so therefore dead (apart from the lights on)
    Door switch ok.

    August 26, 2006 at 11:32 am #186591
    agro
    Participant

    Facia broken behind the pcb,Part number from connect dst1251185300 called luminuis

    August 27, 2006 at 7:27 am #186592
    wilf
    Participant

    Re: Zanussi Condencer dryer model TCE7276w

    Im with agro had this . I had one ,took me a while to find it , your only talking a hairline crack but it stops the button makeing contact

    wilf

    August 27, 2006 at 7:42 am #186593
    DDSDDS
    Participant

    Re: Zanussi Condencer dryer model TCE7276w

    check the swith behind the striking pin, they sometimes fall out of place.

    August 29, 2006 at 6:44 am #186594
    mjhservices
    Participant

    Re: Zanussi Condencer dryer model TCE7276w

    Thank you for your replys.
    Is the Lumilous an electrical part because it looks like a plastic circuit board holder (from the picture on connect) and only costs a few pounds?
    Regards to you all Mark

    August 29, 2006 at 6:35 pm #186595
    agro
    Participant

    Thats the one

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.