sticks last 2min, AEG W/D

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › sticks last 2min, AEG W/D

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • August 30, 2006 at 5:25 pm #20414
    pmb
    Participant

    AEG washer dryer L16810
    I tested it by putting on short spin 4 minutes, when it gets to 2 minutes distribute speed only, It just stays there,
    Checked pressure chamber, but haven’t checked pressure switches
    its a very new model .

    September 2, 2006 at 5:56 pm #186990
    phil59
    Participant

    thyrister overheating on board ?

    September 3, 2006 at 11:06 am #186991
    pmb
    Participant

    Re: sticks last 2min, AEG W/D

    two boards on this, I assume its the main board
    Do they come allready calibrated

    September 3, 2006 at 11:27 am #186992
    Dave_Conway
    Participant

    Re: sticks last 2min, AEG W/D

    If you can get the PNC, I’ll try and dig out some tech info for you 🙂

    Dave.

    September 4, 2006 at 6:49 pm #186993
    pmb
    Participant

    Re: sticks last 2min, AEG W/D

    It was an unevon load
    I didnt notice it had one towel in drum
    Most machines would just finish without spinning,
    well i learned something.

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.