Ariston LV62 Dishwasher

Home › Forums › Public Support Forums › Spare Parts Help › Ariston LV62 Dishwasher

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • August 30, 2006 at 9:42 pm #20420
    shaun evans
    Participant

    The stainless steel & plastic spring loaded flap (which you put your fingers into to open the door) keeps coming adrift from my Ariston LV62 Dishwasher. It seems the two little plasic lugs wont stay in their holes. Can i obtain a replacement flap? Any help would be greatly appreciated.

    Many thanks……..Shaun Evans.

    August 30, 2006 at 10:51 pm #187008
    Dave_Conway
    Participant

    Re: Ariston LV62 Dishwasher

    That’s odd, the flap isn’t shown as a seperate part on the diagram 😕

    It may come as part of the complete control panel, could you check the rating plate for the full model please as there are a few versions (probably only colour varients) of this, I’m guessing it’s a LV62IXUK 🙂

    Dave.

    August 31, 2006 at 9:38 pm #187009
    shaun evans
    Participant

    Re: Ariston LV62 Dishwasher

    Hi Dave, thanks for such a quick reply. The model number is as you reckoned, LV621XUK. I’ve had the panel off, and it would appear that the flap is a seperate item (well one that could be removed anyway). It has two “lugs /arms” that fit through two slots, and there is a small circular moulding on the end of each lug /arm that fits into small holes on the backplate, the flap returns by way of a two armed spring.

    Hope this helps, and thanks for your help……..Shaun.

    September 2, 2006 at 10:10 pm #187010
    Dave_Conway
    Participant

    Re: Ariston LV62 Dishwasher

    Can you send me a photo of the flap please by email (below) and I’ll try and identify it that way for you 🙂

    It’s not shown on the diagram for sure, it may be that the complete facia (console) panel is the only option 🙁

    Dave.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.