- This topic has 1 reply, 2 voices, and was last updated 19 years, 7 months ago by
.
-
Posts
-
Great forum and very useful so far in tracking down the fault on my fridge freezer. I have the classic freezer working fine but fridge getting hotter all the time fault. I have fully defrosted, cleaned out and was ready to order thermisters as the first bits to replace – but when I rebuilt the unit last night, all seemed ok.
But now its playing up again and I have ordered the evaporator and freezer thermisters.
Only difference now is that I get a P1 error code when swithching the power on.
If the thermisters don`t do the job, is the next bit to change the PCB? I am confident the baffle is working fine and the transfer tubes are clear.
If I do need to change the PCB, get I get one from you?
Huge thanks.
🙂
Re: Hotpoint Mistral FF72P
P1 is specifically a freezer thermister failure.
Should there be further complications, any other components can be ordered through spares@ukwhitegoods.co.uk .
Regards,
Penguin45.
- You must be logged in to reply to this topic.