Diplomat 8702 W/D – dead

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Diplomat 8702 W/D – dead

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • September 4, 2006 at 6:19 pm #20565
    myfil
    Participant

    G’Day
    Got a Diplomat 8702 W/D (integrated) that has power, locks the door, but then won’t do nuthin, not a sound.

    Checked I/L (live out on C when door locked OK), timer has L & N present and no signs of damage, module is visually fine (no burns, or blown tracks).

    Is this a hybrid that depends on the module to start up? Any suggestions? Must admit I don’t know where to go from here.

    (Module is the Elmarc H7.9 1200 with 12 plus 8 on the side and 12 on the end)

    Thanks
    Myfil

    September 4, 2006 at 6:24 pm #187505
    Penguin45
    Participant

    Re: Diplomat 8702 W/D – dead

    Door lock is a timer function – everything else runs from the board. It’s a classic failure. May be worth checking the the two big white resistors – if they die, the board won’t power up.

    Regards,
    Chris.

    September 4, 2006 at 10:36 pm #187506
    rocker
    Participant

    Re: Diplomat 8702 W/D – dead

    Been to a diplomat w/d today and the machine is a servis, which has the same fault as yours, and emw have refurb board. might be worth a phone call to see if they can help you.
    John.

    September 5, 2006 at 2:22 pm #187507
    myfil
    Participant

    Re: Diplomat 8702 W/D – dead

    Thanks guys
    Ordered recon board from EMW
    Will let you know what ‘appens

    September 5, 2006 at 2:41 pm #187508
    timdowning
    Participant

    Re: Diplomat 8702 W/D – dead

    Definitely the two big white resistors , very common fault, available from connect they are called dropper resistors.(80 pence each). 10 minute job.

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.