Bosch Dishwasher SGV43E03GB

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Bosch Dishwasher SGV43E03GB

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • September 4, 2006 at 8:24 pm #20567
    bassman
    Participant

    Can anyone advise I have just had a look at this today the machine overfills then pumps out then overfills again then pumps out it will do this allday long I looked for a pressure switch but could not find one.
    How is the water level detected on this machine?
    Any suggestions as to what the fault may be.
    Thanks

    September 4, 2006 at 8:30 pm #187522
    gegsy
    Participant

    Re: Bosch Dishwasher SGV43E03GB

    Numerous posts on this fault bassman.
    Remove front plinth, remove 1ft long ribbed hose from sump to metering unit and thoroughly clean and re assemble.

    Regards

    Greg

    September 4, 2006 at 8:44 pm #187523
    superfix
    Participant

    Re: Bosch Dishwasher SGV43E03GB

    Not this time Greg

    The water level is controlled via a flow sensor, sits in line with inlet valve and side chamber.

    Basically revoles X amount of times then tells motor to run.

    We’ve had quite a few of these go down, sorry but I’m crap with remembering part no’s.

    But I’m 99.9{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} sure that is the culprit.

    September 4, 2006 at 8:53 pm #187524
    Penguin45
    Participant

    Re: Bosch Dishwasher SGV43E03GB

    424099 – impellor jug?

    Chris.

    September 4, 2006 at 9:08 pm #187525
    gegsy
    Participant

    Re: Bosch Dishwasher SGV43E03GB

    Yep Mr P thats the part.
    Cheers for that Boro, that will teach me not to look at diagram 😳

    Greg

    September 4, 2006 at 9:33 pm #187526
    bassman
    Participant

    Re: Bosch Dishwasher SGV43E03GB

    Thanks guys where would we be without this site and all the great input from you all.
    Bassman

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.