- This topic has 1 reply, 2 voices, and was last updated 19 years, 7 months ago by
.
Viewing 2 posts - 1 through 2 (of 2 total)
-
Posts
-
How do I get to the pump and check for a blockage. The unit seems to be on a large plastic mould. I can take the plinth off, but where to a go from there ?
Re: hotpoint DWF30 does not empty
Access to pump on the ‘Bosch’ produced machines is not easy, front door panel and large lower plinth have to be removed. The removal of the pump should be fairly obvious. If it isn’t then I respectfully suggest you click the link in my sig to see if we have someone who can help.
A twist might help. 😉
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.