Bosch WFX 3267 F04 Error

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Bosch WFX 3267 F04 Error

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • September 7, 2006 at 1:13 pm #20662
    Markr
    Participant

    For the second time my washing machine has the F04 error message.

    The first time the machine was restarted, and appeared to work OK.

    This time I am curious what this error message is, incase it relates to something more critical than a basic restart.

    I would be grateful for any help.

    Markr

    September 10, 2006 at 5:43 pm #187899
    linrew
    Participant

    Re: Bosch WFX 3267 F04 Error

    hi

    F04 is pumping out time greater than 6 mins

    probably pump blocked

    check pump and all pipes to/from pump

    linrew

    September 12, 2006 at 4:54 pm #187900
    Markr
    Participant

    Re: Bosch WFX 3267 F04 Error

    Hi thanks for the info.

    i did manage to drain it manually.
    When i opened the filter i found a twenty pence piece (no change there)
    sorry….!
    Checked around the filter enclosure, no other items found.
    Replaced and restarted machine.
    Ran OK for one full wash, then stopped again (beep, beep + F04)
    Repeated above, drained and checked filter.
    This time nothing there.
    Water appears to flow ok to the filter, as the many wet sheets and towels will show.
    Could there be a blockage beyond the filter ie: in the hose leading to the drain?
    ps. It has run half a dozen washes since, with no errors.

    Thanks
    Markr

    September 12, 2006 at 6:27 pm #187901
    superfix
    Participant

    Re: Bosch WFX 3267 F04 Error

    Does the m/c connect to a stand pipe or a combined under sink waste?.

    If it connects to a sink waste, then that is possibly partially blocked.

    Other than that it may be engineer time.

    September 14, 2006 at 11:59 am #187902
    Markr
    Participant

    Re: Bosch WFX 3267 F04 Error

    Hi again

    The Machine connects to a single upright waste pipe, with the hose inserted about 30cm inside.
    Is this what you refer to as a stand pipe?
    From the machine the pipe has a 2.5 metre run out to the drain.

    When it works, water appears to flow freely to the drain. So no obvious blockages in that pipe.

    If we are talking an Engineer visit, is this major works?

    Thanks

    Markr

    September 14, 2006 at 7:24 pm #187903
    Penguin45
    Participant

    Re: Bosch WFX 3267 F04 Error

    You could check the anti syphon bottle in the rear corner of the casing – they clog up from time to time. Power off if removing the lid. Consider also that a 5p piece is exactly the right size to sit in the outlet from the pump.

    Regards,
    Penguin45.

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.