Hoover Performa 1100 ( AC110 )

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Hoover Performa 1100 ( AC110 )

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • September 9, 2006 at 8:36 pm #20721
    bevw
    Participant

    Hi, When my machine goes onto the spin cycle it was only spinning
    slowly,and making a strange noise.Then picking something up off
    the floor, looked under machine and saw sparks coming from
    the motor 😯 😯 . So switched off 💡 .
    Does this mean a new motor 😥 ,

    thanks B W


    Hope i havn’t posted twice first time didn’t seem to work.

    September 9, 2006 at 8:44 pm #188158
    Penguin45
    Participant

    Re: Hoover Performa 1100 ( AC110 )

    It’ll be the motor brushes wearing out, Bev. You’ll need a pair of these:
    http://www.ukwhitegoods.co.uk/modules.p … cts_id=108

    If you’re not confident about removing the motor and fitting them, click the link below for a UKW engineer in your area.

    In the meantime, don’t use the machine – you run a serious risk of cooking the motor – then it gets expensive!

    Power off if investigating.

    Regards,
    Penguin45.

    September 9, 2006 at 9:22 pm #188159
    bevw
    Participant

    Re: Hoover Performa 1100 ( AC110 )

    Thanks for the speedy reply Pemguin 45, will have a look tomorrow
    or husband will 😉 He’s O K with car engines, havn’t let him loose
    on washing machine before.

    thanks again . cheers Bev.

    September 10, 2006 at 12:00 am #188160
    whitevanman
    Participant

    Re: Hoover Performa 1100 ( AC110 )

    bevw wrote:He’s O K with car engines, havn’t let him loose
    on washing machine before.

    thanks again . cheers Bev.

    Similar to the brushes on an alternator on the car, let him have a go , if not as p45 says look up a local wg engineer

    September 10, 2006 at 12:05 am #188161
    Penguin45
    Participant

    Re: Hoover Performa 1100 ( AC110 )

    Power in, instead of out…….
    Evening Wayne…. 😀
    :p45:

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.