Hoover AC178 not spinning

Home Forums Public Support Forums Help And Support Washing Machine Help Forum Hoover AC178 not spinning

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #20727
    BobStark
    Participant

    Hi there.

    I’m trying to fix my in-laws’ Hoover New Wave Auto-Washer 1300 (model AC178) which apparently wasn’t spinning.

    Gut feeling was likely to be motor brushes or belt.

    Whipped the back off, belt is fine so tried a spin cycle with nothing in machine and it worked fine, but the motor sounded very crackly (no visible sign of sparks though).

    Tried the same thing with some towels in the machine – a full cycle first, and then a spin cycle – and absolutely nothing from the motor. (it fills and empties OK and the program display reads as it should)

    Empty it again and try the spin cyle and this time nothing from the motor.

    Is this most likely simply the motor needs re-brushing or is there something else I should consider?

    Cheers for any advice,

    Bob

    #188175
    Washman
    Participant

    Re: Hoover AC178 not spinning

    Hi

    New brushes , but check the armature for wear .

    Unplug and switch off for safety before starting

    Mike

    #188176
    BobStark
    Participant

    Re: Hoover AC178 not spinning

    Thanks Mike – hoping it was that straightforward.

    Bob

    #188177
    Penguin45
    Participant

    Re: Hoover AC178 not spinning

    Brushes are p/no 09036062 – an email to spares@ukwhitegoods.co.uk if you wish to order up a pair.

    Penguin45.

    #188178
    DDSDDS
    Participant

    Re: Hoover AC178 not spinning

    i would advise you change the brushes and stop trying to spin the machine as you may totally kill the motor.
    brushes are cheap motors aint!
    good luck 🙂

    #188179
    BobStark
    Participant

    Re: Hoover AC178 not spinning

    Thanks again guys.

Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.