La Canche

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › La Canche

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • September 13, 2006 at 9:22 am #20808
    PTM
    Participant

    La Canache F21230 Oven
    Any Idea where I can Get Parts from
    No response from the usual suspects

    Any Help gratefully recieved

    September 13, 2006 at 9:26 am #188425
    AMS
    Participant

    Re: La Canche

    what bits do you need?

    Dave

    September 13, 2006 at 10:13 am #188426
    PTM
    Participant

    Re: La Canche

    Im After a Bottem LH Oven Fan Element

    Regards

    September 13, 2006 at 11:13 am #188427
    AMS
    Participant

    Re: La Canche

    The only one of these that I’ve been to used your basic Zanussi 2 turn element.
    Hope this helps,

    Dave

    September 13, 2006 at 11:36 am #188428
    PTM
    Participant

    Re: La Canche

    Thanks I ll give it a go
    Regards Paul

    September 13, 2006 at 5:37 pm #188429
    cookerfit
    Participant

    Re: La Canche

    Sounds like a Lacanche Macon. (Oven below small grill/oven area)

    A 2 or 3 turn Zanussi 2500 watt long neck (eg Connect 3460) will fit but will need clip nuts over the plate because of the screw hole diameters.

    Alternatively, F de F (01202733011) can supply original but they are approx £54.00 list price (don’t mention the Zanussi elements for goodness sake!!!).

    NB Check the fan for good RPM – they are very prone to slowing down due to tightening of the drive end bearing with a rapid demise of the element.

    Any other info needed PM me.

    Regards
    Cookerfit

    September 14, 2006 at 9:17 am #188430
    PTM
    Participant

    Re: La Canche

    Many Thanks for your Responses

    Regards Paul

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.