- This topic has 3 replies, 2 voices, and was last updated 19 years, 7 months ago by
.
-
Posts
-
My Blomberg 1315AAB seems to be stuck on rinse. No matter where I start the programer the Pump seems to run. I have empted the dirty water form the front of the pump and watched the impela going round, but that is all it does. I have checked the Brushes and both are touching. Can someone help?
FIXED IT. Somewere on this forum it talks about a “Pressure Bell” and how to get it working again. This was the problem. I undid the tube from under the round thingy and blew down it, the second time I did this it made clicking noise. Proble solved, dont know what I did but it worked. Thanks to whoever mentioned the Pressure bell.
Re: Can u Help with A Blonberg 1315?? Please
before you opened the pump was it full of water, it may be a blockage in the pressure pipe or more likely a timer fault these machines are notorious for it, the more info we get the better advise we can give
power off if going in
- You must be logged in to reply to this topic.