lux F/F problem

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › lux F/F problem

Viewing 9 posts - 1 through 9 (of 9 total)
  • Author
    Posts
  • September 21, 2006 at 6:37 am #21021
    abbots
    Participant

    lux ER7620B
    925886654

    stat faulty,ordered stat-no problem.
    when trying to fit new stat you need to push capillary down a hole(tube) until the capillary get’s to the red mark painted on it.The problem being the capillary hits something about 5 inches from the red mark and stops.I suspect this will stop the stat working correctly,any suggestions?
    jk

    September 21, 2006 at 4:57 pm #189194
    cab
    Participant

    Re: lux F/F problem

    Hi never come across a problem, unless it has got water in that has frozen.
    the part no. I have is 2262199116 k59l2037 is the one you tried to fit the same?

    cab

    September 21, 2006 at 5:18 pm #189195
    abbots
    Participant

    Re: lux F/F problem

    hi cab,
    thats the stat alright,first time i’ve come across the problem as well,no frozen water,machine been off for 3 days.
    i’ll have to see how it goes with the capillary not in all the way,i suspect it wont stat out though as the capillary wont be on the evaporator correctly.
    john

    September 21, 2006 at 8:06 pm #189196
    cab
    Participant

    Re: lux F/F problem

    hope it works ok the reason I gave thestat type was its not unusual to get the wrong stat in the right bag if you get my drift!

    cab

    September 22, 2006 at 4:06 pm #189197
    pup
    Participant

    Re: lux F/F problem

    hi
    is capillary length same as old one some time new one are longer

    September 22, 2006 at 4:14 pm #189198
    abbots
    Participant

    Re: lux F/F problem

    exactly the same.feels like its hitting a joint in the inner tube or something.
    jk

    September 23, 2006 at 5:58 pm #189199
    pup
    Participant

    Re: lux F/F problem

    hi just a thought hou about pushing something like a cable access rod down the hole

    September 24, 2006 at 12:41 pm #189200
    Simon46
    Participant

    Re: lux F/F problem

    Tried a Bit of twist? Is capillary head end larger than original?

    S.

    September 24, 2006 at 4:26 pm #189201
    abbots
    Participant

    Re: lux F/F problem

    haven’t tried twisting it,i’ll go back and give it a go, head is smaller than original if anything.
    jk

  • Author
    Posts
Viewing 9 posts - 1 through 9 (of 9 total)
  • You must be logged in to reply to this topic.