DIPLOMAT APM 8703 WASHER/DRIER query

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › DIPLOMAT APM 8703 WASHER/DRIER query

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • September 21, 2006 at 3:23 pm #21034
    terrier65
    Participant

    I recently had a new kitchen fitted, inc. the above appliance. This week I noticed moisture has been builiding up and seeping under the laminate flooring. My builder can find no leaks. Could it be condensation-related? Should one run the unit with the decor door closed or open? Also, the final rinse is HOT, is this correct (I’ve always been used to a cool rinse). And the drier seems to heat up the clothes but they are still damp when they come out. Any help will be appreciated as we’re flummoxed and can’t report the unit as faulty, until we can identify a specific fault(!!!)

    Many thanks

    September 21, 2006 at 8:53 pm #189243
    cab
    Participant

    Re: DIPLOMAT APM 8703 WASHER/DRIER query

    hi sounds like a leak to me. Shouldnt rinse in hot water, if it is an installation fault manufacturers repair agent MAY charge you for a call out get installer back to inspect.

    cab

    September 22, 2006 at 9:05 am #189244
    terrier65
    Participant

    Re: DIPLOMAT APM 8703 WASHER/DRIER query

    It’s definitely not leaking … could it be condensation?

    September 22, 2006 at 9:55 am #189245
    terrier65
    Participant

    Re: DIPLOMAT APM 8703 WASHER/DRIER query

    Also, any idea which hose connector should connect to the cold tap, left or right (instruction manual does not say)

    September 22, 2006 at 10:32 am #189246
    Simon46
    Participant

    Re: DIPLOMAT APM 8703 WASHER/DRIER query

    Are the fill valves on the back of the machine coloured red or blue? Hoses may have to be detached to see. Dont forget to turn off the hot and cold valves on your house plumbing first. Also unplug machine for safety.

    Regards
    Simon

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.