- This topic has 7 replies, 2 voices, and was last updated 19 years, 7 months ago by
.
-
Posts
-
Can anyone help? The problem I am having is that when the washer/dryer is switched on, the Extra rinse, 1200-600 and door lock LED flash. It sounds like it is trying to fill but stops after a few minutes, but the LED lights continue flashing. Can anyone suggest how to fix this or what I can check?
Many thanks
Re: How do I fix my Indesit 1200 WIDL 126?
Tell me which lights are flashing by position and not name (i.e from left to right, Light 1, light 2 etc)
Re: How do I fix my Indesit 1200 WIDL 126?
Deepdale wrote:LED 3, LED 4 and the door lock
It’s a temperature fault, so likely as not the heater or heating circuit are to blame. I would advise expert help on this in order to proceed though( see link below)
If you attempt any form of DIY fix then do please ensure you….
:zap: UN-PLUG THE MACHINE FIRST :zap:
Re: How do I fix my Indesit 1200 WIDL 126?
Martin, Thanks for that. How would I go about fixing it myself?
Re: How do I fix my Indesit 1200 WIDL 126?
Deepdale wrote:How would I go about fixing it myself?
Sorry mate on that and for legal and ethical reasons, I cannot say. 😥
All I can say is watch out electric is the silent killer? And try sueing me for that piece of free advice 😉
Re: How do I fix my Indesit 1200 WIDL 126?
Ok no probs, how much is it likely to cost to get it fix? The machine about two years old. what would be cheaper fixing or getting another?
- You must be logged in to reply to this topic.