- This topic has 7 replies, 5 voices, and was last updated 19 years, 6 months ago by
.
-
Posts
-
Complaint of poor wash, both spray arms very floppy and bunged up. Noticed that there does not appear to be any water flowing to the lower spray arm only the top one, is there a diverter on these heaps. ❓
Re: Indesit D63 D/W
Sort of a diverter, there’s a “half load” valve which looks like a solenoid affair which presumably shuts the water off to the top spray arm 😉
Part number C00054985 on the diagram 🙂
Dave.
Re: Indesit D63 D/W
Bugger, this one seems to be working in reverse, loads of pressure to the top arm and nowt to the lower one.
Might be as well to take a valve just in case.
Thanks Dave.
PS. A little OT but can you see a thermistor on the DWM55 diagrams ❓
Re: Indesit D63 D/W
Product Number Model Description Prod. Date Information
23456_37234560100 D 63 (EU) LS WIDTH 60 1950-01-01
23456_37234560200 D 63 (EU) LS WIDTH 60 2004-05-14
23458_37234580100 D 63 FR LS WIDTH 60 1950-01-01
23458_37234580200 D 63 FR LS WIDTH 60 1950-01-01
23458_37234580300 D 63 FR LS WIDTH 60 2003-09-09
23460_37234600100 D 63 (IT) LS WIDTH 60 2003-03-07
23463_37234630100 D 63 UK LS WIDTH 60 1950-01-01
23463_37234630100UK D63UK INDESIT DW CC 23463′ 1950-01-01
23463_37234630200 D 63 UK LS WIDTH 60 2004-03-04
25133_37251330000 D 63 S (UK) LS WIDTH 60 1950-01-01
25133_37251330000UK D63SUK INDESIT DW CC 25133′ 1950-01-01
25133_37251330100 D 63 S (UK) LS WIDTH 60 2004-03-04
Which one Jim?Greg
Re: Indesit D63 D/W
Sorry Greg, I should have kept this to the original post, http://tinyurl.com/nkpnk
Not a D63 but I have looked at Partfinder and cannot see a thermistor for a DWM55 although it does have one.PS. I do hope you copied and pasted all that, would hate to think you typed it all. 😛
Re: Indesit D63 D/W
JIm, isn’t the thermistor on a DWM55 part of the pcb and clips in under the dispenser?
If so, you need to order the module.
🙁
Bob
- You must be logged in to reply to this topic.