Indesit WIL123s

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Indesit WIL123s

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • September 28, 2006 at 1:52 pm #21216
    effzedarr
    Participant

    This is a m/c without a digitat display. Customer says after wash clothes still wet ,doorlight flashing & the second & fourth lites flashing, couldn’t see that error code listed in the known error codes section.If customer puts m/c to spin prog, no probs it spins ok with that load. Checked filter ,pump & outlet hose all ok!
    cheers chaps, Chris.. 8)

    September 28, 2006 at 1:55 pm #190047
    effzedarr
    Participant

    Re: Indesit WIL123s

    Soz thats supposed to be DIGITAL!
    Chris.. 8)

    September 28, 2006 at 2:41 pm #190048
    Martin
    Participant

    Re: Indesit WIL123s

    effzedarr wrote:the second & fourth lites flashing, couldn’t see that error code listed in the known error codes section.

    Well it is listed there and says “Pressure switch stuck on full” though quite why the machine still spins is beyond the error code theory I guess? 😆

    September 28, 2006 at 5:39 pm #190049
    effzedarr
    Participant

    Re: Indesit WIL123s

    Cheers for that Martin, going back tues morn, might be a blocked pressure chamber that slowly releases after a short period of time , will check it & let you know .
    many thanx ,Chris.. 8)

    September 30, 2006 at 4:51 pm #190050
    phil59
    Participant

    Re: Indesit WIL123s

    hi sorry to say it but ive done loads of these,do we all realise how “”**&{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} the boards are ive got 6 in a box all had it 😥

    September 30, 2006 at 6:21 pm #190051
    Penguin45
    Participant

    Re: Indesit WIL123s

    phil59 wrote:ive got 6 in a box all had it

    Get them sent off and repaired then – it’s cheap enough.

    Chris.

    October 3, 2006 at 10:11 pm #190052
    trotter
    Participant

    Penguin45 wrote:

    phil59 wrote:
    ive got 6 in a box all had it

    Get them sent off and repaired then – it’s cheap enough.

    Chris.

    Check the pressure hose as it goes down the side of machine, they wear a tiny hole in them and the pressure is released very slowly. also had open circuit cold valve causing this error code!

    October 5, 2006 at 5:33 pm #190053
    effzedarr
    Participant

    Re: Indesit WIL123s

    I guess I’ll never know the answer to this ,customer rang up to cancel return call, even though she wasn’t going to be charged any extra [unless we fit a part] ,some folk are strange 😯 .
    thanx for all your replys chaps,who knows she may get back to me!?!?
    cheers Chris.. 8)

  • Author
    Posts
Viewing 8 posts - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.