Oven Door Seal (Diplomat Select 610)

Home › Forums › Public Support Forums › Spare Parts Help › Oven Door Seal (Diplomat Select 610)

Viewing 13 posts - 1 through 13 (of 13 total)
  • Author
    Posts
  • October 1, 2006 at 12:28 pm #21302
    knightrider
    Participant

    Can anyone help 🙁
    My door seal on my Diplomat Select 610 oven has broken & fallen off. I cam back from holiday & went to use the cooker & found the door seal hanging off. I have the instruction manual which denotes the model no as AHY33** Fan assisted with clock. It has the hooks on the corner but I cannot seem to be able to put the seal back on. How much are these to purchase & are they relatively easy to put on as there are no instructions in the manual. This was purchased from MFI about 5 years ago. Do I have to undo the four screws on the oven to reseal it?
    Hoping some can shed some light on this annoying subject
    Keith

    October 1, 2006 at 2:51 pm #190353
    Penguin45
    Participant

    Re: Oven Door Seal (Diplomat Select 610)

    We’ll be able to get you one easily enough, but spares@ukwhitegoods.co.uk will need the “**” bit……. If it’s not on a label around the door frame, it’ll be on the roof of the oven box.

    Regards,
    Penguin45.

    October 1, 2006 at 5:23 pm #190354
    knightrider
    Participant

    Re: Oven Door Seal (Diplomat Select 610)

    Hi Penguin45,
    I have looked at the roof of the oven door but cannot see no model number. Do you mean to undo the four screws and slide the oven box out?
    Funny thing is that even the instruction manual that came with it just prints differing model numbers with only the first two numbers then **

    Thanks
    Keith

    October 1, 2006 at 5:27 pm #190355
    Penguin45
    Participant

    Re: Oven Door Seal (Diplomat Select 610)

    knightrider wrote:Do you mean to undo the four screws and slide the oven box out?

    Afraid so…..

    Problem is that Diplomat don’t actually make anything. It’s all badge engineered to specification by various continental manufacturers; at least five that I can think of! The Brandt-made ovens comprised most of the 33 series, but there is no way of being absolutely sure without the full code.

    Penguiin45.

    October 1, 2006 at 5:47 pm #190356
    knightrider
    Participant

    Re: Oven Door Seal (Diplomat Select 610)

    Thanks Penguin45
    Is a new seal easy to put on once I have located the correct code or do you have to engage the seal with the box out & then fit the seal and screw the box in with the four screws.
    Hope you understand what I mean as I have tried to reseal the old one with no luck (although it is broken anyway)

    Thanks
    Keith

    October 1, 2006 at 5:55 pm #190357
    Penguin45
    Participant

    Re: Oven Door Seal (Diplomat Select 610)

    Most of these oven door seals simply hook on at the corners, so should be able to be done with the oven insitu. Which makes it particularly annoying when you have to pull it out for the sake of a couple of missing digits :rolls: .

    Penguin45.

    October 1, 2006 at 6:02 pm #190358
    knightrider
    Participant

    Re: Oven Door Seal (Diplomat Select 610)

    Thanks Penguin45

    Will slide out the box & get back to you with the code (won’t be till tomorrow now though)

    Will speak with you tomorrow

    Many thanks for your help
    Keith 🙂

    January 7, 2008 at 6:58 pm #190359
    TimJH
    Participant

    Re: Oven Door Seal (Diplomat Select 610)

    Hi, I also am looking for a door seal for a Diplomat Select 610 oven. Did you manage to supply one? Please let me know the part number and I’ll order one!

    Thanks

    Tim

    January 7, 2008 at 7:39 pm #190360
    Penguin45
    Participant

    Re: Oven Door Seal (Diplomat Select 610)

    610 is a generic – Dave’ll need the AHY number to supply you.

    Penguin45.

    January 7, 2008 at 8:56 pm #190361
    TimJH
    Participant

    Re: Oven Door Seal (Diplomat Select 610)

    That’s a shame, I’m struggling to get the unit out. I took out the four screws but it wouldn’t budge. I think it must be attached elsewhere too. I was just wondering if anyone knew what the AH number was for a Diplomat Select 610, or is it possible that there were many different models which were all called a 610?

    Perhaps the original poster discovered the real model number of their 610. I’d be prepared to take a gamble on mine being the same!

    Cheers,

    Tim

    August 11, 2009 at 4:51 pm #190362
    jonhodder
    Participant

    Re: Oven Door Seal (Diplomat Select 610)

    Hi can anyone help.

    I have a select 610 diplomate oven and the glass frontage has shattered.

    How can i replace this and where can i get the parts from?


    Any advise is appreciated.

    August 11, 2009 at 8:43 pm #190363
    Penguin45
    Participant

    Re: Oven Door Seal (Diplomat Select 610)

    This thread has repeatedly asked posters for the model number of the appliance and nobody bothers. If you want a part number identifying, state the model number.

    Penguin45.
    Moderator.

    August 15, 2009 at 4:34 pm #190364
    boselecta
    Participant

    ha ha three different people posting and no model number yet!

    I have to say I do admire you for working hard all day fixing appliances and then spending your time identifying parts for the general public!

  • Author
    Posts
Viewing 13 posts - 1 through 13 (of 13 total)
  • You must be logged in to reply to this topic.