Indesit WIL103 LED’s Flashing

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Indesit WIL103 LED’s Flashing

Viewing 10 posts - 1 through 10 (of 10 total)
  • Author
    Posts
  • October 1, 2006 at 12:49 pm #21303
    Rickardo
    Participant

    hi, hope someone can help me! the wifes going frantic!
    WIL103 Indesit washer about 14 months old has jsut stopped working, will not complete wash programme and 2 ld’s flash alomg with main ld red flashing?
    Any ideas what is wrong and how to fix/overide?

    Any help will be mostly appreciated— thanks
    Rickardo ( if i can fix this quick i can go to pub!!!) 😀

    October 1, 2006 at 2:44 pm #190365
    indespoint
    Participant

    Re: Indesit WIL103 LED’s Flashing

    HI which leds are flashing?

    October 1, 2006 at 2:54 pm #190366
    Rickardo
    Participant

    Re: Indesit WIL103 LED’s Flashing

    delay timer and easy rinse

    October 1, 2006 at 3:10 pm #190367
    Penguin45
    Participant

    Re: Indesit WIL103 LED’s Flashing

    Left to right, 1 – 4, which ones? Our tech info does it by numbers……..

    Regards,
    Penguin45.

    October 1, 2006 at 3:12 pm #190368
    Rickardo
    Participant

    Re: Indesit WIL103 LED’s Flashing

    1 & 4

    October 1, 2006 at 3:19 pm #190369
    Penguin45
    Participant

    Re: Indesit WIL103 LED’s Flashing

    Nasty – Eeprom error, basically the coding chip on the computer board has gone wrong.

    Time for pro help in all honesty. Some of these you can buy the Eeprom separately, some it’s the whole board and at best the coding system offers only guidance.

    Click the link below for a UKW engineer in your area.

    Regards,
    Penguin45.

    October 1, 2006 at 3:43 pm #190370
    Rickardo
    Participant

    Re: Indesit WIL103 LED’s Flashing

    posted problem on another forum site and got the answer! alls well —— Thanks anyway

    October 1, 2006 at 3:51 pm #190371
    Penguin45
    Participant

    Re: Indesit WIL103 LED’s Flashing

    Go on then, what was it?

    October 1, 2006 at 3:59 pm #190372
    Rickardo
    Participant

    Re: Indesit WIL103 LED’s Flashing

    Just a bit of string trapped in the pump filter.
    That probably saved me £100 and a rip off!!
    How come you didn’t suggest cleaning out the pump filter????

    October 1, 2006 at 5:32 pm #190373
    Penguin45
    Participant

    Re: Indesit WIL103 LED’s Flashing

    No drain is 1, 3 + 4 flashing……….. I did point out that the coding system is not accurate 😀 .

    Had your original post included “My machine doesn’t drain properly”, we could have gone straight to it.

    Enjoy your pint,
    Penguin45.

  • Author
    Posts
Viewing 10 posts - 1 through 10 (of 10 total)
  • You must be logged in to reply to this topic.