- This topic has 15 replies, 6 voices, and was last updated 19 years, 6 months ago by
.
-
Posts
-
Hi,
I have a built-in CDA CW494 that sometimes, just after the final rinse and just before the pump finally empties it, starts beeping and will continue all day if left!
If I open the door when the beeping starts, the machine seems to have finished but is VERY steamy and hot.
Resetting doesn’t seem to work. I have no manual and can’t find help, anywhere.
Any tips would be gratefully received.
Cheers.
Re: CDA CW494
when you open the door, count the flashes between the pauses and that will give you a fault code, let me know how many times it flashes and ill tell you 🙂
It could possibly be an NTC fault or a control board fault on the heater circuit.Re: CDA CW494
hi
these machines usually come with a 5 year warranty, it may be worth contacting CDA to discuss a repair (labour costs) if it less than 5 years old
linrew
Re: CDA CW494
linrew wrote:hi
these machines usually come with a 5 year warranty, it may be worth contacting CDA to discuss a repair (labour costs) if it less than 5 years old
linrew
I didn’t realish they came with a 5 year GT. Call out your local service agent then and get it done properly 😛Thank you both.
Typically, it hasn’t done it for a while now but I’ll look at the flashes.
It was in the house when we bought it but I’d gues it’s less than 5 years old, excellent!
R.Re: CDA CW494
hi
if you call CDA with all the numbers (from a sticker usually on the kickplate on the bottom of the machine) they will be able to tell you how old the machine is
sorry i dont have a number for CDA
linrew
Re: CDA CW494
the serial number **04 ****** **** is the year and
**** 24**** **** is the week number it was made.Re: CDA CW494
kandl-appliancerepair wrote:when you open the door, count the flashes between the pauses and that will give you a fault code, let me know how many times it flashes and ill tell you 🙂
It could possibly be an NTC fault or a control board fault on the heater circuit.Cheers mate. I looked and the light just flashes continuously, no pauses. What happens is that, even though I select a wash programme, it stops early, beeps and selects the rinse prog.
Weird!Oh, it’s about 10 weeks out of gurantee – damn!!!
Re: CDA CW494
PerranOak wrote:
kandl-appliancerepair wrote:
when you open the door, count the flashes between the pauses and that will give you a fault code, let me know how many times it flashes and ill tell you 🙂
It could possibly be an NTC fault or a control board fault on the heater circuit.Cheers mate. I looked and the light just flashes continuously, no pauses. What happens is that, even though I select a wash programme, it stops early, beeps and selects the rinse prog.
Weird!Oh, it’s about 10 weeks out of gurantee – damn!!!
I think its Mr. Engineer time im afraid! Cant help you if its flashing constantly, unless one of the others knows, could be anything!sorry
Re: CDA CW494
My CDA494 stops after about 15 minutes and repeates a 4 flash error code. The beep also sounds.
Any ideas on how to reset. Thank you.
Re: CDA CW494
I’ve got a cda 494 as well , i’ve got a blink code fault . It flashes 7 times .
Can any one help .Thanks grizz
- You must be logged in to reply to this topic.