w-pool AWM6100

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › w-pool AWM6100

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • October 3, 2006 at 11:29 am #21357
    johno1998
    Participant

    Hi guys have a problem with this whirlpool awm6100 . we Turn it on select the program the door locks, but nothing happens appart from the door light flashing on the facia.But if we put it on a spin only it works. any ideas ❓

    October 3, 2006 at 1:36 pm #190570
    bzz67
    Participant

    Re: w-pool AWM6100

    possible pump fault.some whirlpool machines wont fill or empty when pump goes oc or broken wires to pump.

    October 3, 2006 at 3:29 pm #190571
    Martin
    Participant

    Re: w-pool AWM6100

    Hmmmmm? Well on the assumption you have checked the heater insulation, the air chamber is clear, the water valve is OK, the wiring harness isn’t chafed, the pump is running and the door interlock works?………Main module up the swanny? 🙁

    October 3, 2006 at 6:17 pm #190572
    Penguin45
    Participant

    Re: w-pool AWM6100

    Brushes/motor circuit.
    Chris.

    October 5, 2006 at 3:26 pm #190573
    admin
    Keymaster

    please clarify exactly what happen when set wash-program(sequentially) because after your explanation: nothing is set=dirty contacts inside programmer(also selector)=broken memory program

    October 5, 2006 at 7:49 pm #190574
    johno1998
    Participant

    Re: w-pool AWM6100

    HI guys thanks for all the info. Went back to her house armed with all your knowledge. The F####r started to work. Thats life I suppose 👿

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.