Zanussi DE6544

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › Zanussi DE6544

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • October 5, 2006 at 12:36 pm #21434
    dc1dc1
    Participant

    I have a Zanussi DE6544 dishwasher & when I turn on the power button the light comes on, but when I press any on the program buttons nothing happens (no lights or anything).
    The water inlet pipe seems ok so does the waste pipe. The instruction manual has no comment to make with regard to the fault, so I was hoping someone might be able to shed some light on the problem.

    Product # 911888012
    Type 911N81-88F

    Thanks,
    Dave

    October 5, 2006 at 8:35 pm #190846
    cab
    Participant

    Re: Zanussi DE6544

    without going into a diagnostic program to funstion test all components its difficult to say, on the majority of faults a code is displayed by a sries of flashing lights if no code is displayed and you cannot select a program I would suspect a board failure, this may be caused by an other component failure. Best to seek some advice, click on the reb tool box!

    cab

    October 7, 2006 at 12:05 am #190847
    Demon
    Participant

    Re: Zanussi DE6544

    Weird …I have the same model and the exact same fault.

    Have now purchased a replacement but would be interested to find out possible causes for this fault.


    Cheers
    D

    December 8, 2006 at 10:09 am #190848
    kemap
    Participant

    Re: Zanussi DE6544

    I.am looking for the solution to the same problem on the same model?
    looks like a trip to the shops……….

    for washing up liquid….. 😥

    December 9, 2006 at 12:33 am #190849
    Penguin45
    Participant

    Re: Zanussi DE6544

    As per Cabs post above, the fault will almost certainly be the computer board. At about £95 plus the VAT, it’s worth getting it investigated professionally as it would be an expensive mistake to make if you’re wrong.

    Regards,
    Penguin45.

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.