Hotpoint W/Mc WMA44 Motor/Door Circuit?

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hotpoint W/Mc WMA44 Motor/Door Circuit?

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • October 10, 2006 at 3:22 pm #21567
    laurenceuk
    Participant

    Hi,

    Can anyone tell me if when the motor plugs are disconnected on this
    machine, the door won`t lock. That is, is the interlock in circuit with the
    motor.

    Motor is burnt out on customers machine. Could`nt test with motor
    connected when trying a new interlock to find out extent of problems.

    Thanks

    Laurence

    October 10, 2006 at 3:37 pm #191353
    Martin
    Participant

    Re: Hotpoint W/Mc WMA44 Motor/Door Circuit?

    laurenceuk wrote:Can anyone tell me if when the motor plugs are disconnected on this
    machine, the door won`t lock. That is, is the interlock in circuit with the
    motor.

    Yes I do believe if the motor is disconnected the door lock led will flash to indicate a circuit fault. Also if the motor has burnt out it may well have caused probs with the PCB?

    It’s worth noting also that if there is visible damage to the “X1” marked part of the main circuit board, then both motor and interlock can be to blame!

    October 10, 2006 at 3:52 pm #191354
    laurenceuk
    Participant

    Re: Hotpoint W/Mc WMA44 Motor/Door Circuit?

    Thanks Martin,

    Lets hope it was just the motor when I return and try another one 😯 .

    Laurence

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.