Zanussi DE 6744

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Zanussi DE 6744

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • October 12, 2006 at 4:35 pm #21642
    S1MON
    Participant

    I have a problem with the above dw

    Fitted a new pcd approx 6 weeks ago when the dw had a program a selection problem and was working intermitantly.

    I have come back today and if you select any program either the washing phase light or the washing and drying phase lights are flashing together. The m/c is doing nothing at all. No leaks are obvious, sump and filters have been checked and the appliance meters out all ok! is this requiring another pcb!!!!!

    Any test modes available for this model… anything ive missed

    November 9, 2006 at 6:08 pm #191983
    S1MON
    Participant

    Re: Zanussi DE 6744

    Hi

    I have still got problems with the above Zanussi machine. It is coming up with a anti-flood fault. I have checked everyting but I can not see a float switch or mircoswitch anywhere on the machine. It does thou have a open base??? Slightly worrying! Its my old dears machine so I know it has never been touched before.

    Now I have had it running but it will intermitantly just do nothing flashing the anti-flood fault code. I have run it on a test cycle and everything works as it should, wiring and all components have been checked again.

    It is beginning to annoy me a bit, it just doesnt seem logical.

    I have been sent info on fault codes etc, gone throu all of this wondering if this is going to be another pcb….. or to the skip………

    Any ideas thanks

    November 9, 2006 at 7:20 pm #191984
    Penguin45
    Participant

    Re: Zanussi DE 6744

    Sounds like the good old IWMS fault to me………

    Chris.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.