Fisher&Paykel Washing Machine 701 with error code 100000

Home › Forums › Public Support Forums › International Forums › Australasian Appliance Forum › Fisher&Paykel Washing Machine 701 with error code 100000

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • October 15, 2006 at 8:26 am #21711
    Chris Ryan
    Participant

    G’day
    It took me hours to find your site, but it looks as if it was worth it.

    Our beloved and over worked 701 has become a tad annoying by turning itself on and beeping with the 5th led on, or stops anywhere in the cycle beeping with no lights on.
    I entered the diagnostics and got the lights from left to right 10000011.

    Any one got any ideas?

    Chris
    Google Earth 32 09′ 19′ S, 148 39′ 46″ E

    October 15, 2006 at 9:00 am #192258
    Penguin45
    Participant

    Re: Fisher&Paykel Washing Machine 701 with error code 10

    The computer board is not sensing information from the Rotor Position Sensor on the motor correctly. Problems are usually dodgy wiring at or around the sensor, corrosion through damp or possibly the sensor itself.

    Power off if working inside the machine, please.

    Regards,
    Penguin45.

    October 15, 2006 at 9:20 am #192259
    Chris Ryan
    Participant

    Re: Fisher&Paykel Washing Machine 701 with error code 10

    G’day

    It has gone dark so I will have a go in the daylight.
    I will unplug it so the “killer-volts” wont get me, even though its the amps that do the damage.


    Thankyou
    Chris

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.