Miele G646SC

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Miele G646SC

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • October 25, 2006 at 7:36 pm #22011
    LittleMan
    Participant

    Hi
    Can any one tell me why this machine flashes inlet outlet have not yet looked at it so any advice would be good.
    Many thanks
    Les

    October 25, 2006 at 8:31 pm #193407
    Kentish
    Participant

    Re: Miele G646SC

    Siezed wash motor, in a similar way that the Bosch d/w motor bind up?.

    October 25, 2006 at 9:32 pm #193408
    LittleMan
    Participant

    Re: Miele G646SC

    Thanks will check it out.
    Les

    October 26, 2006 at 8:55 am #193409
    Seamy
    Participant

    Re: Miele G646SC

    Also check for water in bottom (floor) making float switch. Could be something stuck in non-return valve at pump. These are the most likely culprits.

    October 26, 2006 at 4:49 pm #193410
    LittleMan
    Participant

    Re: Miele G646SC

    Hi
    Thanks for all your help traced fault to float switch activated by thermostat popped out of grommet on sump of machine.
    Thanks again for all your help
    Les

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.