- This topic has 4 replies, 3 voices, and was last updated 19 years, 5 months ago by
.
-
Posts
-
Hi all
Been to this one today. Start any wash programme, machine fills for a few seconds, then 2 second pause, carries on filling to level 1 motor begins tumbling, carries on filling to level 2. Fill then stops, pumps out with only the end cycle light flashing/bleeping 3 times. Occasionally the machine will fill and wash ok with no errors but after waiting approx 15 mins there’s no sign of it heating i.e no live supply to element. Have checked pressure system for blocks and leaks, element reads 29.8 ohms, ntc reads 7.22 ohms. Could it be pressure switch even though there are 3 healthy clicks. Have checked info on tds disc but doesn’t mention the end cycle light flashing on its own. Any help appreciated!!!
Rick
posted in on wrong forum originally??? It’s been a long day :bang:Re: Zanussi ZWF1421W fault code
RickT wrote:ntc reads 7.22 ohms.
That’s waaaaaaaay off – 7.22 kohms, maybe……..
Chris.Re: Zanussi ZWF1421W fault code
you need to go into diagnostics to check faulty components, search the dta base there should be help on this if not email me and I will pass you the details.
cab
Re: Zanussi ZWF1421W fault code
Thanks for reply. Recalled today and run diagnostic. Showed fault E33
(pressure switch, heater,pcb). Intermittant fault on filling (aborts sometimes during fill and sometimes over-fills and sometimes fills ok). No leaks or blocks in system. Heater functions ok on test. Will order pressure switch as pcb will kill the job.
Rick
- You must be logged in to reply to this topic.