Zanussi ZT102

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Zanussi ZT102

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • November 1, 2006 at 10:29 am #22177
    scots
    Participant

    Hope someone can help. This BI Zanussi has had 2 timers fitted and now works ok apart from the final con rinse, it just stops, no power to cold valve, nowt.

    Ideally if someone has a wiring diagram it would be very helpful. I have TDS but it hasn’t got the circuit diagrams.

    Thanks
    Brian

    November 1, 2006 at 3:59 pm #193902
    Martin
    Participant

    Re: Zanussi ZT102

    scots wrote:This BI Zanussi has had 2 timers fitted

    That’s your problem I expect? Hence your need for a wiring diagram (sorry not on my TDS either 🙁 )

    I wonder why 2 timers have been fitted anyway? Strange? 😕

    November 1, 2006 at 5:17 pm #193903
    scots
    Participant

    Re: Zanussi ZT102

    Hi Martin.
    I have fitted both from EMW (normally fix first time). 1st timer would not stop at the end of the cycle, it would move on into another program. The second one I fitted has this problem of no supply to cold valve when on cond rinse it just stops. The other rinses are ok, strange as the only difference I can see is the cam moves the fill nozzle onto the cond compartment.
    The nice lads from EMW are sending me another, hopefully I can put this to bed.

    Thanks again for reply Martin

    November 8, 2006 at 8:40 pm #193904
    bendaireboy
    Participant

    Re: Zanussi ZT102

    not backuntil weekend but will lookin old zanussi archives!!!!!!to see if ive still got the wiring diag,nige

    November 8, 2006 at 8:51 pm #193905
    scots
    Participant

    Re: Zanussi ZT102

    Thanx for all the help, ended up it was the timer, EMW as always gave me another timer and worked ok

    Brian

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.