removing bearing on dryer motor

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › removing bearing on dryer motor

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • November 6, 2006 at 12:30 am #22307
    fasetester
    Participant

    hi guys could some one tell me if the plate that holds the fan on the motor can be removed so the bearing can be removed it seems like it is on splines the dryer is a creda simplicty mod no t522vw and if it can can it be put back on thanks 🙂 fasetester.

    November 6, 2006 at 8:28 am #194420
    Martin
    Participant

    Re: removing bearing on dryer motor

    fasetester wrote:and if it can can it be put back on.

    As far as I recall it can!

    November 6, 2006 at 3:10 pm #194421
    fasetester
    Participant

    Re: removing bearing on dryer motor

    thanks martin do you need a puller or can it be taped of the splines 🙂 fasetester

    November 6, 2006 at 3:29 pm #194422
    Martin
    Participant

    Re: removing bearing on dryer motor

    fasetester wrote:thanks martin do you need a puller or can it be taped of the splines

    Tapped off the splines because the fan fixing is a solid lump of alloy stuck on the end of the motor shaft I seem to remember?

    November 6, 2006 at 7:47 pm #194423
    wilf
    Participant

    Re: removing bearing on dryer motor

    easy job. bearings are 6001zz might be tight on the rotor shaft use a puller or protect the rotor in the vice and use two levers. a drop of locktite on the fan hub and bobs your uncle

    wilf 😀

    November 7, 2006 at 4:01 pm #194424
    fasetester
    Participant

    Re: removing bearing on dryer motor

    thanks martin and wilf for ur help fasetester 🙂

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.