Indesit WD14UK

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Indesit WD14UK

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • November 6, 2006 at 6:57 pm #22322
    maltheviking
    Participant

    Arrgggh pigging Indesit again 😥

    Machine worked fine last time customer used it, when she came to use it again it refused to start up fully

    When switched on the On/off indicator flashes and holds as normal, door lock clicks and locks then nothing. No usuall relay click on the module. Timer/switch will reset as normal.

    Any clues guys n gals’ before I order a module? 😕

    Mal

    November 6, 2006 at 7:05 pm #194482
    scots
    Participant

    Re: Indesit WD14UK

    Seem to remember had same fault a few months ago, like you I was on module route. Can’t recall why I checked brushes but did and that was it. Worn brushes.

    Brian

    November 7, 2006 at 9:06 am #194483
    maltheviking
    Participant

    Re: Indesit WD14UK

    Thanks Brian

    Checked the brushes, machine only two years old 😥

    :rolls: expected lifespan for indesit :rolls:

    November 9, 2006 at 8:10 pm #194484
    HEADSTAND
    Participant

    Re: Indesit WD14UK

    Worn brushes r the norm 4 this fault but also broken wires 2 motor / motor plug 2 mod ,

    if the mod does not recieve return tracer sig through motor it will do the listed fault.

    only fault that does not result in timer ticking round or led flashing

    November 9, 2006 at 8:48 pm #194485
    johnnyj
    Participant

    Re: Indesit WD14UK

    A broken wire at heater can also cause this fault.

    November 20, 2006 at 8:59 am #194486
    maltheviking
    Participant

    Re: Indesit WD14UK

    Update.

    Module faulty as first suspected.

    Thanks guys for the suggestions, I will “log” them into memory for future reference 😉

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.