Baumatic Dishwasher BDW8 Nothing on control panel

Home Forums Public Support Forums Help And Support Dishwasher Help Forum Baumatic Dishwasher BDW8 Nothing on control panel

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #22324
    agill
    Participant

    Hello
    We have an 18 month old dishwasher.
    Last nite I put on a wash but when I came down the morning it was still running!!
    I found that there were 2 light on the panel, then I switched it off and now I cannot set a program.
    there is water in the bottom as the drain was blocked.

    any ideas?

    thanks
    Aidan


    Update on this, I cleaned it out, drained it and dried it as best I could.
    I tried the option by pressing P and then ON.
    This did nothing,
    I then did a combination of P + ON, then delay, the 1/2 load.
    In here there are 5 options, i tried them on, 1 filled the machine, 1 drained it, 1 just vibrated, 1 hummed but still no joy!!
    I got it to fill and empty using the options below.
    Should I just let the machine evaporate the water?

    thanks

    #194487
    Penguin45
    Participant

    Re: Baumatic Dishwasher BDW8 Nothing on control panel

    Do you mean that there was water in the tray beneath the machine? If so, you should drain this off and allow the flood protection system to reset. It might work after that.

    Regards,
    Penguin45.

    #194488
    TOWAN
    Participant

    Re: Baumatic Dishwasher BDW8 Nothing on control panel

    you will need to leave it to dry out as well.If the motor gets wet then nothing works till it all drys out.
    Once dry it should work again.

    #194489
    agill
    Participant

    Re: Baumatic Dishwasher BDW8 Nothing on control panel

    Lads,
    I let this dry out since, tried it again today, took the machine out, tipped it on its side, but no joy.

    the tray you mentioned? Where exactly is this?

Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.