Eurolec Essentials DW-004 Dishwasher

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › Eurolec Essentials DW-004 Dishwasher

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • November 12, 2006 at 2:07 pm #22481
    weefudgie
    Participant

    Hi,
    Have had the above dishwasher for a couple of years with no problems. Today, though, it wont respond to input on the control panel. All the lights are on constant, and the stop button doesn’t turn them off. If I turn it off at the wall, the lights are back on when I put the switch back on again. The manual doesn’t cover this, other than saying the door is not closed properly? Could it be the microswitch on the latch? Or any other suggestions?

    Thanks.

    November 12, 2006 at 4:49 pm #195159
    Penguin45
    Participant

    Re: Eurolec Essentials DW-004 Dishwasher

    weefudgie wrote:Could it be the microswitch on the latch?

    Correct. Or the latch mechanism. Or both…. you never know with these Chinese dishwashers.

    Power off if opening up the door to investigate. The edges of the door are as sharp as a razor, BTW.

    Regards,
    Penguin45.

    November 12, 2006 at 5:08 pm #195160
    weefudgie
    Participant

    Re: Eurolec Essentials DW-004 Dishwasher

    Hi, Thanks for the reply, I’ve tried bypassing the microswitch but no joy. I also tried the mechanism with the door dismantled, no joy. It just will not respond to any input.

    November 12, 2006 at 5:34 pm #195161
    Penguin45
    Participant

    Re: Eurolec Essentials DW-004 Dishwasher

    In that case the circuit board’s probably a gonner……

    Personally, I have no idea as to price or a source – an email to spares@ukwhitegoods.co.uk should get you results if you wish to keep this one going.

    Penguin45.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.