- This topic has 10 replies, 4 voices, and was last updated 19 years, 4 months ago by
.
-
Posts
-
Anyone got a part no. for the disp. to tub hose for this model please, there is probably a Servis/ Ardo/ Whirlpool equivalent, but I don’t know it 😳
PS how do you get the door seal, drain hole to seal to the tub on one of these, I had four attempts last time I fitted one 😕 Said I would never do another one! GREAT DESIGN :rolls:
Re: Diplomat 8702 Dispenser hose
maltheviking wrote:Anyone got a part no. for the disp. to tub hose for this model please, there is probably a Servis/ Ardo/ Whirlpool equivalent, but I don’t know it 😳
414006600 – RRP £4.91 excl
maltheviking wrote:PS how do you get the door seal, drain hole to seal to the tub on one of these, I had four attempts last time I fitted one 😕 Said I would never do another one! GREAT DESIGN :rolls:
Cursing the Italians helps, just a pig sometimes. :snigger:
K.
Re: Diplomat 8702 Dispenser hose
maltheviking wrote:
PS how do you get the door seal, drain hole to seal to the tub on one of these, I had four attempts last time I fitted one 😕 Said I would never do another one! GREAT DESIGN :rolls:Good old fashioned debor. make sure it is lined up with the hole first, if not turn the seal until it is. plenty of debor on it, push the whole lot inside the tub and carefully pull out the outer lip hopefully leaving the inner lip inside the tub, hopefully some debor will remain on the pipe while you can spend the rest of the day picking most of the rest of it off your fingers.
Re: Diplomat 8702 Dispenser hose
eastlmark wrote:
Good old fashioned debor. make sure it is lined up with the hole first, if not turn the seal until it is. plenty of debor on it, push the whole lot inside the tub and carefully pull out the outer lip hopefully leaving the inner lip inside the tub, hopefully some debor will remain on the pipe while you can spend the rest of the day picking most of the rest of it off your fingers.
I see, plenty of “hopefulls”, thats about right 😉You would have thought they would have designed a “protrusion on the drum so as the hose could be clamped over it , or even designed the door seal better and done away with a drain. Some sicko in the design office (early learning school) is laughing their nuts off at the Brits expence. 😥
Re: Diplomat 8702 Dispenser hose
kwatt wrote:
maltheviking wrote:
Anyone got a part no. for the disp. to tub hose for this model please, there is probably a Servis/ Ardo/ Whirlpool equivalent, but I don’t know it 😳414006600 – RRP £4.91 exclK.
Hi Ken
Ordered one of these and received a length of hose suitable for valves to dispenser 😕 Have the wholesalers got it wrong? 😕
- You must be logged in to reply to this topic.