F&P GW709 Motor Control board Repair, i have a solution

Guys,
Xmas time my GW709 died, the Cold Valve died and took the board out on the way.

Well i bought a Valve at about $50 and fitted it to find the Board was faulty.

I left it for some time (11 months) before i got jack of the laundry mat and thought id spend the $350 on a new board.

Before i did this i thought i would crack it open to see what the Motor board contained. Lots……… and lots of components

coming from a AV back ground and having done many low level board repairs i thought id have a crack at fixing it 1st.

Well i found the problems associated and fixed them.
2 hours of my time plus parts, not bad…..

So if any of you have a dead motor board, contact me and i will repair your board for you.
If i cant fix it i wont charge you. If its the same fault as mine $100 AUD other faults POA.

i’m locatede in Melbourne, Australia.

Thanks to those who helped with the fault codes.

Steve