- This topic has 2 replies, 2 voices, and was last updated 19 years, 5 months ago by
.
-
Posts
-
Need to get access to innards of dishwasher in order to check inner plumbing for blockages. Tried at weekend but eventually gave up after removing plinth etc and the 4 screws (2 each side) that appear to hold side panels to main body. Panel seemed to be secured at back of machine but I couldn’t figure out how. Would appreciate any advice on the best way to get to the inner pipework and also what is the ideal position for the machine to be in to achive this (e.g. on its back?).
Managed to put everything back together ok but noticed that the 4 screws (2 on each vertical side beneath the main door seal) that appear to secure the side panels no longer tighten properly?
Any advice would be greatly appreciated.
Re: How do I get side panel off Bosch SGS6952GB/13?
Heese wrote:Need to get access to innards of dishwasher in order to check inner plumbing for blockages.
Judging by your previous posts I suspect your problem may be a tad tricky to solve? But if it helps, to remove the side panels, first you need to remove the lid. That involves unlatching the plastic latches at the back, then sliding the lid backwards then off!
The side panels are simply held in place by 2 T20 screws after that!
All the best now, but I really would advise a little expert intervention. Do please consider clicking the link below for a local expert to sort it for you. 🙂
- You must be logged in to reply to this topic.