Nardi LSi60h motor

Home › Forums › Trade Technical & Spare Parts Forums › Trade Spare Parts › Nardi LSi60h motor

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • November 15, 2006 at 10:23 pm #22605
    cornwell40
    Participant

    Looks like an Indesit inside, motor is haier xd-xd50.
    Looks like a standard Indesit motor but is it?

    Customer has just bought this with their new house. Kitchen recently fitted by previous owner and a more complete and utter balls up I have never seen. Would like to help her if i can so any info appreciated.

    Tony C

    November 17, 2006 at 10:45 pm #195592
    rickard
    Participant

    Re: Nardi LSi60h motor

    I dont know about it being a Indesit motor but the part number is

    012g9380538hr

    November 18, 2006 at 12:17 am #195593
    Penguin45
    Participant

    Re: Nardi LSi60h motor

    rickard wrote:012g9380538hr

    That’s a Haier number……… 😕

    Chris.

    November 19, 2006 at 6:14 pm #195594
    rickard
    Participant

    Re: Nardi LSi60h motor

    The motor is listed as a Haier motor on Nardi parts diagram

    November 20, 2006 at 10:24 am #195595
    cornwell40
    Participant

    Re: Nardi LSi60h motor

    Tried to contact Nardi on the numbers from their website but to no avail so far. Anyone know any other contact details for them.

    Tony C

    November 24, 2006 at 10:56 am #195596
    cornwell40
    Participant

    Re: Nardi LSi60h motor

    Indesit motor fits and works fine. I ordered the 077118 motor which just needs the end cap at the rear retaining off the old one and rivetting back on.
    I just need to cure the hole in the tub corner where the fitter shut the door on a screw 👿 and then reinstall it using something more suitable than 2 x 6″ long 3×2 blocks on every (well 3 ) foot. 😈

    Tony C

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.