- This topic has 2 replies, 2 voices, and was last updated 19 years, 5 months ago by
.
-
Posts
-
Hello everyone,
We have the above washing machine which seems to have a intermittant fault. It works fine some days but on others when you load it up sometimes when it starts it program about a minute later the on / off button starts continuely flashing and the mini load (light 1), Rinse load (light 3), Timesaver (light 4) all flash at the same time and starts pumping out the water it has taken on. None of these functions has been selected at the start.
Hello does anyone know what this means!!! 😥
Thanks if advance
Rainbow
Re: Error code on hotpoint Aquaruis WF430P
Strange at it may seem, this is supposed to signify a pump or draining error. :rolls:
These codes are at best a guide, they are not bombproof but do point you in the right direction.
One thing you may be able to do yourself is to check the pump and sump hose filter for obstructions.
Remove the mains plug before you touch anything, the pump is down at the back, follow the grey plastic pipe to locate, blockages common in large black rubber hose. Arm yourself with a few towels if you attempt this.If you do not think you can do this click the link in my sig to see if we have someone who can help, also worth noting that you are covered for all parts for 5 years under Hotpoint’s 5 year parts warranty.
Jim.
- You must be logged in to reply to this topic.