hotpoint WF860

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › hotpoint WF860

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • November 21, 2006 at 3:49 pm #22765
    cornflakes
    Participant

    client just contacted me,, had plumber in to day machine was in operation he turn off water by accident

    error code FO3 showing

    any ideas..client rang hotpoint..slammed phone down on them as they where rude and only interested in an expensive callout fee

    cant seem to find model in error code pages

    thanks for nay ideas

    Graham
    Leicestershire

    November 21, 2006 at 4:46 pm #196083
    iadom
    Moderator

    Re: hotpoint WF860

    They are there in a manner of speaking, a post by me on page #3 of the known error codes, linked to a post by Dave Conway on page #2 Indesit WIDL codes. They are the same. Rather unhelpfully F03 is listed simply as NTC fault. Turning the water off should have no effect on the machine other than stopping it with H2O in display.

    Jim.

    November 22, 2006 at 7:17 pm #196084
    cornflakes
    Participant

    Re: hotpoint WF860

    thanks jim

    is there any way the test mode can be brought up or a re-set proceedure to clear fault signal

    November 22, 2006 at 9:05 pm #196085
    iadom
    Moderator

    Re: hotpoint WF860

    I think one method of reset is to press and hold the Start/Cancel button for a few seconds until you get three beeps, then press and hold Start/Cancel & On/Off at the same time until you get three beeps. Usually works for me.

    Jim.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.