leak from a zanussi iz 16

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › leak from a zanussi iz 16

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • November 23, 2006 at 9:12 pm #22833
    mepone
    Participant

    I have a leak coming from the bottom of my washing machine, only 3/4 way through cycle and was going to check the pump but was wondering how to get at it. Any help, tips please

    November 23, 2006 at 9:57 pm #196279
    kwatt
    Keymaster

    Hi,

    That machine is quite specialised as far as I am aware and there are 18 different versions, so you will need the PNC and/or serial number. 😕

    The cabinet splits in two, as is the case with most Zanussis but it doesn’t look simple to get at in the least so I’d have recommend that you seek pro help if you’re unsure.

    K.

    November 24, 2006 at 2:15 pm #196280
    mepone
    Participant

    Re: leak from a zanussi iz 16

    The type is P6749639
    prod no 91451300500
    ser no 13800184

    The machine starts leaking on the rinse cycle as soon as it starts draining the machine

    November 24, 2006 at 2:43 pm #196281
    Martin
    Participant

    Re: leak from a zanussi iz 16

    mepone wrote:The machine starts leaking on the rinse cycle as soon as it starts draining the machine

    Probably not your machine that is at fault then? I suspect your waste pipe is blocked and overflowing? Does the grey drain hose hook into a stand pipe? If so, take a close look at that pipe as it may be where the fault lies? 😉

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.