Bosch HBN2820GB – Oven door hinge fault

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Bosch HBN2820GB – Oven door hinge fault

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • November 29, 2006 at 9:27 am #22945
    MickGeorge
    Participant

    Hi folks

    Went to above cooker last week… oven door not shutting proply.. changed hinges but still not closing proply.. looks like plates that the hinge sits on in the oven unit may have got damaged or bent..

    Does anyone know if that plate is removeable and comes as spare part.. there were no obvious fixings from the outside and the oven looked a pig to get out as lead short at back (b@*&^$ kitchen fitters)

    Thought I’d ask you guys so I can do job in one go.. or not.. as the case maybe..

    Thanks

    November 29, 2006 at 9:56 pm #196609
    leavemetogetonwithit
    Participant

    Re: Bosch HBN2820GB – Oven door hinge fault

    Bosch have excellent facility called “quickfinder” on their site where you can find exploded diagrams showing parts/prices/partnumbers etc.
    http://www.bshappliancecare.com
    Mike

    November 29, 2006 at 10:32 pm #196610
    superfix
    Participant

    Re: Bosch HBN2820GB – Oven door hinge fault

    If there are no hinge carriers on it, then the frame is twisted and unrepairable.

    November 30, 2006 at 9:35 am #196611
    MickGeorge
    Participant

    Re: Bosch HBN2820GB – Oven door hinge fault

    Thanks for the pointer to the Bosch web site Mike.. that is a really use full link..

    It looks from the exp view that the plate is all part of the frame..

    Thanks for all the help both

    Maybe we could make a stickey of all the manifactures web sites like this that provied spares and exploded views.. that would be nearly as usefull as the stickey of error codes 💡 🙂

    Mick

    December 1, 2006 at 10:26 pm #196612
    mike412
    Participant

    Re: Bosch HBN2820GB – Oven door hinge fault

    I had this problem very recently with the 096784/096785 hinges, would not quite close after fitting new hinges.
    Changed hinges for same again and problem solved.
    I guess the hinges had not been tensioned up properly in the factory.
    Hope this helps,
    Mike.

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.